Question: RUN genome music (MuSiC2) error
0
gravatar for Haitao
11 months ago by
Haitao20
Macau University
Haitao20 wrote:

Dear All,

From Install to run, I took almost one and half week, but still can not run MuSiC2 successfully.

Here is my install log and run command:

INSTALL log: (non-root install)

  1. For low version of samtools-0.1.19, can not install, shown error, I have got the way to solve the problem: download the zlib; cd zlib-1.2.8/; make; Change samtools Makefile: CFLAGS="-O3 -fPIC" ./configure # --prefix=/home/haitaowang/zlib-1.2.8/; make; make install
  2. calcRoiCovg: copy zlib-1.2-8/lib to samtools-0.1.19/; then cd calcRoiCovg/; make
  3. Joinx I can easily to install, no any error
  4. Change .bashrc put $PATH samtools, calcRoiCovg, Joinx
  5. Use cpanm install MuSiC2

Then: I can active music2 Program: music2 - Mutational Significance in Cancer (Cancer Mutation Analysis) version 2. Version: v0.1

Author: Beifang Niu && Cyriac Kandoth Usage: music2 <command> [options]

Key commands: bmr ...........

I prepared my bam-list, ROI, reference

bam-list like:

417T_GATK_Variants_filtered /home//kumar/C059.bam   /home/kumar/417T.bam
C059_GATK_Variants_filtered     /home/kumar/E717.bam    /home/kumar/C059.bam

ROI

1       3073251 3074324 4933401J01Rik
1       3102014 3102127 Gm26206
1       3205899 3207319 Xkr4
1       3213437 3216970 Xkr4
1       3252755 3253238 Gm18956

reference

>1 dna:chromosome chromosome:GRCm38:1:1:195471971:1 REF
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN

music command

music2 bmr calc-covg \ 
--bam-list /home/haitaowang/Project/Wenhui_DNA/music/list.txt \
--roi-file /home/haitaowang/Database/roi_file_for_music \
--reference-sequence /home/haitaowang/Database/Mus_musculus.GRCm38.fa \
--output-dir /home/haitaowang/Project/Wenhui_DNA/music/output

then I got such error

417T_GATK_Variants_filtered.covg not found in /home/haitaowang/Project/Wenhui_DNA/music/output/roi_covgs. please make a command list file to run calcRoiCovg !

then I checked created output file:

  1. total_covgs: (only show header) Sample Covered_Bases AT_Bases_Covered CpG_Bases_Covered CG_Bases_Covered

  2. roi_covgs (empty)

  3. gene_covgs (empty)

If I changed the command like this:

music2 bmr calc-covg \
--bam-list /home/haitaowang/Project/Wenhui_DNA/music/list.txt \
--roi-file roi_file_for_music \
--reference-sequence mm10.fa \
--output-dir output/417T_GATK_Variants_filtered.covg \
--normal-min-depth 6 \
--tumor-min-depth 8 \
--min-mapq 20 \
--bp-class-types AT,CpG,CG

then the error show like this: Can't call method "print" on an undefined value at /home/haitaowang/.perlbrew/libs/perl-5.24.0@lib001/lib/perl5/TGI/MuSiC2/CalcCovg.pm line 108.

Thanks in advance if any one can help this! Haitao

snp music genome • 696 views
ADD COMMENTlink modified 11 months ago • written 11 months ago by Haitao20
1
  1. What are the instructions you are following? Have you seen this: Installation of the MuSiC suite on unsupported Linux distributions
  2. Does your system have docker installed? This will nearly obsolete the need for installation.
  3. "zlib" is a popular development library, so it makes sense for a root user to install it system-wide. You should not need to compile it from scratch for samtools.
  4. What is the operating system you are using? Run command cat /etc/*release to find out.
  5. If it is a cluster of compute nodes, what job scheduler does it use? E.g. LSF, SGE, PBS/Torque, etc?
ADD REPLYlink written 11 months ago by Cyriac Kandoth4.6k
  1. I'm following the instructions from MuSiC2 github: https://github.com/ding-lab/MuSiC
  2. We don't have docker been installed.
  3. NA
  4. CentOS release 6.6 (Final) LSB_VERSION=base-4.0-amd64:base-4.0-noarch:core-4.0-amd64:core-4.0-noarch:graphics-4.0-amd64:graphics-4.0-noarch:printing-4.0-amd64:printing-4.0-noarch CentOS release 6.6 (Final) Rocks release 6.2 (SideWinder) CentOS release 6.6 (Final)
  5. Yes. it is a cluster of compute nodes, but I'm not familiar with scheduler things.

I also try to install the old version (genome-music-0.4.1), before yesterday it is can not be installed, still have problem when I build music, the error like this:

failed to extract pod: : Error while autoloading with 'use Genome::Model::Tools::Music::Survival': Can't use 'defined(@array)' (Maybe you should just omit the defined()?) at /home/haitaowang/.cpanm/work/1476924800.15296/genome-music-0.4.1/blib/lib/Genome/Model/Tools/Music/Survival.pm line 336.

Later, I download "Genome/Model/Tools/Music/Survival.pm" from github, and modify the script:

#check to see if this gene is on the list (if there is a list at all)
        if( defined @{$mutated_genes_to_include} ) {
            next unless (scalar grep { m/^$gene$/ } @{$mutated_genes_to_include});
        }

to

  #check to see if this gene is on the list (if there is a list at all)
            if( defined **() and** @{$mutated_genes_to_include} ) {
                next unless (scalar grep { m/^$gene$/ } @{$mutated_genes_to_include});
            }

then, It is work.

ADD REPLYlink written 11 months ago by Haitao20

Thanks, Cyriac. I'm still think why MuSiC2 not run in our HPC_jade, I try to run calcRoiCovg independently, It is work well, so I don't know if there are any library problem? (coz i didn't follow to install libbz2-dev and libgtest-dev, honestly, our manager didn't install apt-get function on HPC, I don't know how to install without root privileges)

the old version now running.

Thanks again, Haitao

ADD REPLYlink written 11 months ago by Haitao20
Please log in to add an answer.

Help
Access

Use of this site constitutes acceptance of our User Agreement and Privacy Policy.
Powered by Biostar version 2.3.0
Traffic: 1176 users visited in the last hour